Mixing Chamber Top and Throttle Slide
(a) Thoroughly clean the outside of the carburetter
(b) Undo the two screws securing the mixing chamber top and withdraw the throttle valve and needle.
(c) Compress the throttle spring drawing it out of the slide. Holding the spring and top to one side to gain clearance, remove the needle and its securing clip.
(d) Unhook the throttle cable from the slide once the needle is removed.
(e) Compress the air valve spring and unhook the cable to release the air slide, spring and brass tube.
INFO FROM HERE
http://www.amalcarb.co.uk/TechnicalDetail.aspx?id=11
singgah tengok je akak tak tau pasal ni semua :)
ReplyDeletepyka dtang singgah blog baru dia jgk . hehe
ReplyDeleteSerius cakap aku memang kurang sikit bab² spare part motosikal ni.. hihi
ReplyDeleteTeruja nak tengok gambar penuh jentera yang dah siap je... ;)
folloe sini
ReplyDelete